Showing all 13 results
D Handle & Plate£15.00 + VAT (£18.00 inc. VAT)
Bolt through stainless steel D-handles (mounted on plate)
– Highest quality #304 stainless steel
– Satin stainless steel finish
– 19mm diameter
– Bolt through fixings / plate mounting provided
Door Cill (AKA Sill)From £20.00 + VAT (£24.00 inc. VAT)
Finish off your steel door installation with one of our flat cills. Powder coated in signal white (RAL 9003) as standard, ready to be cut down to your door width.
Door CloserFrom £35.00 + VAT (£42.00 inc. VAT)
Heavy duty door closer, manufactured to comfortably close a door weighing up 115KGs. Finished in satin silver.
- Cover material: Aluminium
- Bar material: Steel
- Cylinder material: Zinc
Door Viewer£8.00 + VAT (£9.60 inc. VAT)
A simple, quick and easy job to install to any of our doorsets. This comes as standard on our ‘front door range’, but if you would like a spy hole in any of our other doors, one can be fitted within a matter of minutes. Available in chrome and satin chrome finishes.
Friction Stay£30.00 + VAT (£36.00 inc. VAT)
• Manufactured from Iron Castings with steel angle plate Silver Powder Coated.
• Suitable Steel Outward Opening Doors.
• Face Mounted Stay allows Door Opening to be Limited to around 90 degrees.
• Variable Friction Mechanism can be Adjusted by Rotating Hexagonal Bolt.
• See video below for demonstration and installation.
Kick Plate£25.00 + VAT (£30.00 inc. VAT)
Protect you door from damage and marks with our stainless steel door kick plates. Available in a range of widths to suit your needs. Height is 150mm.
Countersunk holes are pre-drilled for quick and easy installation.
Letterplate£35.00 + VAT (£42.00 inc. VAT)
The all in one letterbox solution for your front door. The letterbox set has superior corrosion resistance, sprung flaps inside and out, concealed flap operating mechanism. The telescoping sleeve creates a tunnel through the door which can accommodate for a variety of door thicknesses. Available in chrome and satin chrome finishes. Price quoted is for seperate item and does not include fitting.
Push Plates£8.00 + VAT (£9.60 inc. VAT)
AKA Touch Plate/Finger Plate.
Manufactured from Stainless Steel Grade #306, our pre-drilled push plates are 300mm x 75mm.
Security Drop Bar KitFrom £60.00 + VAT (£72.00 inc. VAT)
Add to the strength of your security door with the addition of 2 security drop in bars.
The kit consists of brackets, bars and fixings, suitable to accommodate inward or outward opening doorsets.
Stormguard Rain Deflector / Rain Drip£25.00 + VAT (£30.00 inc. VAT)
A necessity for inward opening external doors, our rain drip deflects water from the threshold seal, eliminating the risk of water ingress.
2 rain drip sets are required for double doors.
Toughened Steel High Security Euro Lock Escutcheon£9.99 + VAT (£11.99 inc. VAT)High Security Euro EscutcheonsConcealed bolt through fixing (from one side only – internal). Cannot be face fixed.Protects cylinders from attack with “mole -grips” & similar attach methods such as bumping and pulling.Toughened Steel – Satin Chrome
WINBAG® Inflatable Air Wedge£15.00 + VAT (£18.00 inc. VAT)
Key features of the WINBAG® inflatable air wedge include:
Holds up to 135kg in weight
Manual inflatable wedge to aid lifting your steel door off it’s hinges
Can be used in gaps of 2mm up to 50mm
As this is an air wedge, it will not leave any scratches on the door surface
Easy hand operated release valve
Concealed Shoot Bolt for Double Door (Flush Bolt)£20.00 + VAT (£24.00 inc. VAT)
Pre-fitted as standard to the passive leaf of the double and leaf & half multi point locking high security steel door sets (heavy duty), the concealed shoot bolts are also held in stock as replacement parts.