Security Trim Kit Installation Video

Our Security Trim Kit is recommended with all security installations to protect the fixings from attack but also as a quick and easy way to finish your door.

Take appropriate safety precautions before beginning installation. Consider your surroundings and wear PPE if required.

Measure the full height and width of the opening. Mark the security trim and cut two lengths of the height and one length of the width. Cut a 45 degree angle into the ends of the trim, where they will meet when installed. Use a file to smooth off any burrs or sharp edges.

Mark three equal points down the 35mm side of the security trim, where it will be fixed to the doorframe. Using a 5.0mm drill bit, drill through the fixing positions. Offer the security trim up to the doorframe and push it into the corner so it’s butted up against the wall and the frame. Using the drilled holes as a template, drill through the fixing positions using a 5.0mm drill bit. Using the pop rivets provided, secure the security trim into place.

Check out the full range of our doors, locks and accessories on our website.